Eye Protection Table Lamp is a table lamp designed specifically for eye protection. It aims to reduce the damage of blue light to the eyes and provide a comfortable lighting experience through scientific spectrum design, soft light output and ergonomic design. This type of table lamp usually uses an eye-protection light source to simulate natural light or a color temperature close to natural light to avoid the stimulation of traditional cold white light to the eyes. In addition, Eye Protection Table Lamp also focuses on humanized design, such as adjustable brightness and angle to adapt to different scenarios and needs, ensuring that users can reduce the burden on their eyes and protect their eyesight when using it for a long time.

Eye Protection Table Lamp Parameters:

Eye Protection Table Lamp Technical Process:

1. Light source technology

LED chip: SMD 2835 lamp beads with high color rendering index (Ra≥95), color temperature 4000K (±100K), simulate natural light spectrum, and reduce blue light hazards (RG0 level is harmless).

Optical design: honeycomb lens + reflector cup structure, light efficiency ≥90lm/W, uniformity ≤3 (national standard AA level standard), illumination ≥500lx within the irradiation radius of 50cm.

2. Circuit and control

Power drive: constant current drive power supply, input voltage 24V/0.75A, power 14W, efficiency ≥85%, no flicker (fluctuation depth<0.5%).

Operation mode: touch switch + sliding dimming, supports 10%-100% brightness adjustment, response time<0.1 second.

3. Structure and material

Lamp body material: ABS+PC flame retardant shell, temperature resistance -20℃ to 60℃, impact strength ≥3kJ/m².

Lamp arm design: dual-axis adjustable aluminum alloy lamp arm, maximum elevation angle 120°, horizontal rotation 360°, suitable for different usage postures.

Eye Protection Table Lamp Features:

1. Eye protection design

LED Eye Protection Table Lamp with Screen is equipped with advanced eye protection technology and adopts 4000K neutral white temperature, which is neither too glaring nor dim, and meets the requirements of human visual comfort. Its light source has been optimized to effectively reduce the radiation of harmful blue light and reduce the risk of eye fatigue and dryness. In addition, the built-in screen design can further filter stray light, ensure that the light is evenly distributed, and provide users with a softer lighting experience.

2. Intelligent touch and dimming

This table lamp is equipped with a touch switch and sliding dimming function, which is extremely convenient to operate. Users can turn the light on or off with a light touch, and adjust the brightness by sliding to meet the needs of different scenes. This intelligent design not only improves the user experience, but also avoids the possible misoperation problems caused by traditional mechanical switches.

3. Flexible and adjustable

The lamp arm of LED Eye Protection Table Lamp with Screen is made of high-toughness material and supports multi-angle adjustment. Whether reading, writing or working, users can adjust the optimal lighting angle according to their own habits to ensure that the light directly shines on the target area and avoid shadow interference.

4. Safe and reliable

The Eye Protection Table Lamp is designed with safety in mind. The power interface is hidden to prevent dust and moisture from entering, while avoiding the risk of accidental electric shock. In addition, the circuit of the table lamp has been strictly tested and meets international safety standards, ensuring that users can use it with peace of mind.

5. Multiple color options

The LED Eye Protection Table Lamp with Screen provides three fashionable color options: Macaroon Pink, Macaroon Green, and Macaroon White. These soft colors are not only beautiful, but also can be integrated into different home styles, adding a touch of freshness and vitality to the indoor environment.

6. High efficiency and energy saving

The Eye Protection Table Lamp has a power of only 14W and a voltage of 24V/0.75A, which is a low-energy consumption product. Its efficient LED light source significantly reduces energy consumption while providing sufficient brightness, which is in line with modern environmental protection concepts. Long-term use can not only save electricity bills, but also reduce carbon emissions, contributing to sustainable development.

7. High-quality materials

The outer shell of the LED Eye Protection Table Lamp with Screen is made of ABS (Acrylonitrile Butadiene Styrene), which has good durability and impact resistance. ABS material is not only light but also easy to clean, which can keep the appearance clean for a long time and extend the service life of the product.

Eye Protection Table Lamp Application:

1. Study and Reading

LED Eye Protection Table Lamp with Screen is an ideal choice for students and reading enthusiasts. Its eye protection design and adjustable brightness can effectively reduce visual fatigue caused by long-term reading, help users concentrate and improve learning efficiency. In addition, the 4000K color temperature is close to natural light, which helps protect vision development and is especially suitable for primary and secondary school students.

2. Office and Writing

In an office environment, the soft light effect and flexible angle adjustment function of this table lamp are very suitable for writing and computer work. It can effectively relieve the discomfort caused by facing the screen for a long time and improve work efficiency. With touch dimming operation, switching between different lighting modes is also more convenient and quick, meeting a variety of office needs.

3. Children's Room Lighting

For children's rooms, Eye Protection Table Lamp is an excellent choice. Its soft light and multiple color options can not only protect children's eyesight, but also create a warm atmosphere and promote a healthy growth environment. ABS material is environmentally friendly and non-toxic, ensuring the safety of children, and is an ideal choice for parents.

4. Bedroom auxiliary lighting

In the bedroom, this table lamp can be used as a bedside lamp to provide soft night lighting. Its low blue light characteristics help improve sleep quality, allowing users to enjoy a comfortable light environment before going to bed. The macaron series has gentle and elegant colors, adding a touch of life aesthetics to the bedroom.

5. Travel and camping

Due to its portable clip design, the LED Eye Protection Table Lamp with Screen is also very suitable for travel and camping. It can be easily fixed in a tent or on a tabletop to provide reliable lighting support for outdoor activities. The built-in low-power LED light source has a long battery life and is suitable for multiple uses in mobile scenes.

6. Creative decoration

In addition to its functional uses, the stylish appearance and multiple color options of the Eye Protection Table Lamp also make it a part of home decoration. Whether it is a study, living room or studio, this table lamp can add a sense of modernity and art to the space, combining practical and aesthetic value.

Eye Protection Table Lamp Maintenance:

1. Regular cleaning

In order to maintain the optical performance and neat appearance of the LED Eye Protection Table Lamp with Screen, it is recommended to wipe the lampshade and shell with a soft dry cloth regularly. Avoid using detergents containing alcohol or other chemical solvents to avoid damaging the ABS surface. In case of stubborn stains, wet the cloth with a small amount of clean water and wipe it gently, then wipe it with a dry cloth. Do not let the liquid penetrate into the interior of the lamp to prevent short circuits or affect normal use.

2. Avoid high temperature environment

The Eye Protection Table Lamp should be placed in a well-ventilated place, away from heat sources and direct sunlight. Excessive temperature may cause the ABS material to deform or age, affecting the service life of the product. At the same time, long-term exposure to high temperature may also affect the stability of the LED light source, resulting in reduced brightness or shortened life. Therefore, during use, try to choose a cool and dry location to place the table lamp to extend its service life.

3. Plug and unplug the power supply correctly

Be sure to unplug the power plug after each use. Long-term plugging in not only wastes electricity, but also increases the risk of electrical failure. In addition, when plugging and unplugging the power supply, hold the plug and avoid pulling the wire to prevent damage to the wire. It is recommended to disconnect the power supply when not in use for more than 24 hours to ensure safe use of electricity and reduce standby energy consumption, thereby improving overall efficiency and safety.

4. Check the connection parts

Regularly check whether the connection parts of the lamp arm of the Eye Protection Table Lamp are loose. If looseness is found, it should be adjusted in time or contact after-sales service for repair to ensure stability and safety during use. Especially after frequent angle adjustment or mobile use, more attention should be paid to the fastening of the structural parts to avoid accidental damage or inconvenience caused by the falling of parts.

5. Avoid heavy pressure

Although the lamp arm and clip of the LED Eye Protection Table Lamp with Screen are sturdy, they still need to be avoided from heavy pressure or severe impact. Improper external force may cause structural damage and affect normal use. It is recommended to be careful when carrying or storing to avoid collision with other objects. If any parts are deformed or malfunctioning, stop using them immediately and contact professionals for processing.

6. Proper storage

When the lamp is not in use, it should be stored in a dry, cool place and try to avoid being squeezed by other hard objects. If it is not used for a long time, it is recommended to disconnect the power supply and remove the battery (if any) to prevent battery leakage or corrosion of the internal circuit. At the same time, the product can be stored in the original packaging box to avoid dust accumulation and bumps during transportation to ensure that it is still in good condition when it is used again.

Heshan Mingkeda Industries Co., Ltd. was established in 1984.

We specialize in various kinds of lighting fixtures, such as camping lamp, table lamp, spot light, wall lamp, ceiling lamp, pendant lamp, floor lamp and decorative lamp. We provide outstanding product, modern design and excellent service to 

our customers. Based on excellent quality, novel style and powerful productive ability, we successfully recommended our to all over the world, especially European countries and North America.

Our factory has 130 employees, including production employees, engineers, salesman, Purchaser, financial accountant, quality inspection, etc., our factory covering an area of 12000 square meters. It has a production workshop, warehouse, office, inspection room and sample room.

Our main products are OEM and ODM. Our team of our factory which has more than 41years of design & produce experience in the lighting industry. 

We focusing on designing home decoration spotlights before 2009.

Then focusing on the research and development of aluminum profiles and acrylic ceiling lamps from 2003 to 2015.

And supporting a series of lamps in 2000, such as: spotlights / ceiling lights / chandeliers / wall lamps / desk lamps and floor lamps.

In 1984, we adhere to the development of indoor series decorative lamp at the same time, a large number of research and development and production of battery table lamps.

This is the whole research and development process of our new products. Each new design, from the outlook, size, color matching, structure to technology etc., we strive for excellent, each new product is combined with our painstaking effort.

We are equipped with the best designer team, and from the design drawing to final sample, the whole process is totally completed in our own factory.

We can guarantee that each step will be well handled by professional engineers and machines.

After continually improvement, we integrate the customer information and market information into our product, consequently, at least 70% of our new designs are popular to customers and win are large market.

We always participate in the domestic lighting design competition, basically can win the certificate, the competition is not only a test of the research and development of new products, but more importantly, it can improve the best platform for our design team's design ability.

We have always been committed to providing customers with the best quality lighting products and services, we know that product quality is very important to customers.

Therefore, from the procurement of raw materials to the delivery of finished products, we strictly control the quality of products to ensure that customers can sell our products with peace of mind.

Our factory also has conventional safety testing equipment, which is convenient for customers to understand product parameters.

As we strictly stick to the managerial idea "innovation leads to development", we are improving and developing new products day by day.

Along with high quality products, customer-oriented service and competitive price, we are enjoying a good reputation among our domestic and overseas customers, most of them have built long term cooperation relationship with us.

Meanwhile, with continuous and vigorous participation in various trade exhibitions at home and abroad, we are always looking for new export markets for business growth.

HISOON Lighting philosophy is to continuously innovate products, sincere service and competitive price. We believe, high quality products and sincere service can surely meet your all needs. Welcome to join us now for your brighter futurel.

FAQ:

Q1. Can I have a sample order for led light?

A: Yes, for the first order,we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 7-14 days, mass production time needs about 60 days for first order, 45 days for repeat order. Specifit time according to your order.

Q3. Do you have any MOQ limit for led light order?

A: yes, is about 50-500pcs according to the light.

Q4. How do you ship the goods and how long does it take to arrive?

A: The sample will be shipped by DHL, UPS, FedEx or TNT on your request. It usually takes within 7 days to arrive. The mass production will shipped by sea.

Q5. How to proceed an order for led light?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6. Is it OK to print my logo on led light product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 2 years warranty to our products.

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.